Konica Minolta 9760 User Manual page 49

To perform a manual feed transmission with FEEDER selected:
1 Press Select Function
2 Press BROADCAST
The display shows
FEEDER TX
YES(LOC.) NO( )
3 Enter the location, then press START.
If you do a lot of broadcast transmissions, change this
setting to MEMORY.
To perform a broadcast transmission with MEMORY
selected:
1 Press Select Function.
2 Press BROADCAST
The display shows
BROADCAST/MEMORY TX
YES(LOC./#) NO( )
3 Enter the list of locations, then press START.
19 NOT USED
20 ECM FUNCTION
The Error Correction Mode (ECM) function may help your fax
machine improve communication in areas where telephone line
conditions are marginal. Refer to the "Problem Solving" section
of this user's manual for other suggestions if you have
communication problems.
Available settings are ON (default) and OFF.
FEEDER TX
FEEDER TX
21 REMOTE DIAGNOSIS
The remote diagnostics feature allows a service person
remotely to dial and service your fax machine.
Available settings are ON and OFF (default).
22 PC/FAX SWITCH
This function is active only when the Multifunction
Printer Option is installed and your fax machine is set to
the PC Fax answering mode. In that case, incoming faxes
are saved directly to the PC's disk without being printed.
If the PC is turned off or not functioning, the fax machine
acts as a stand-alone fax machine and prints incoming
faxes when this PC/FAX SWITCH function is set to ON
(default). If this function is set to OFF, the fax machine
will not accept incoming faxes when the PC is turned off
or not functioning.
23 ONE TOUCH PARAM
This function allows you to activate the Echo Protection
feature for a specific One Touch key, without changing the
normal settings. Echo Protection can improve
communication with a location in a noisy telephone area.
For instructions on changing One Touch Parameters
settings for a One Touch key, refer to the "Programming
Your Speed Dial directory, One Touch Faxing" section of
this user's manual.
|
User's Manual 49