Stacked Washer/Electric Dryer Installation Requirements - Maytag MLE20PRBZW1 Installation Instructions Manual

STACKED WASHER!ELECTRIC DRYER INSTALLATION
REQUIREMENTS
Dryer Direct Wire
Fire Hazard
Use 10 gauge copper wire.
Use a UL (isted strain relief.
Disconnect power before making e|ectrical connections.
Connect neutral wire (white or center wire) to center
terminal.
Ground wire (green or bare wire) must be connected to
green ground connector.
Connect remaining 2 supply wires to remaining
2 termina|s (go(d).
Securely tighten all electrical connections.
Failure to do so can result in death, fire, or
electrical shock.
if connecting by direct wire:
Power supply cable must match power supply (4-wire or 3-wire)
and be:
[] Flexible armored cable or nonmetallic sheathed copper
cable (with ground wire), covered with flexible metallic
conduit. All current-carrying wires must be insulated.
[] 10-gauge solid copper wire (do not use aluminum).
[] At least 5 ft. (1.52 m) long.
14