Maytag MLE20PRBZW1 Installation Instructions Manual page 37

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour; 0-23 hours.
• Select START HOUR by pressing the
lower-left (PERM. PRESS) button.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour; 0-23 hours.
Select STOP HOUR by pressing the
lower-left (PERM. PRESS) button.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
9. 10 SPECIAL PRICE DAY
9.10
This represents the day of the week and whether
special pricing is selected for that day. A number
followed by "0" indicates no selection that
particular day (9.10). A number followed by an "S"
indicates selected for that day (9.1S). To change
the value of "0" and "S," use the lower-right
(QUICK CYCLE) button. Days of the week (1-7) are
selected by pressing the lower-left (PERM. PRESS)
button.
When exiting set-up code "9," the display must show the
current day of week:
A. 00
A. 00
A. SC
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1=Sunday 1S
20 Day 2=Monday 2S
30 Day 3=Tuesday 3S
40 Day 4=Wednesday 4S
50 Day 5=Thursday 5S
60 Day 6=Friday 6S
70 Day 7=Saturday 7S
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
VAULT VIEWING OPTION
This option is either NOT SELECTED "00" or
SELECTED "SC."
Not Selected "00."
Selected "SC."
Press the lower-right (QUICK CYCLE) button
once to change this selection. When selected,
the money and/or cycle counts will be viewable
(if counter option(s) is selected) when the coin
box is removed.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
Code Explanation
b. 05
b. 05
C. 20
C. 20
C. 05
E. 00
E. 00
E. AC
R 00
R 00
R CP
R SU
VALUE OF COIN 1
This represents the value of coin 1 in number
of nickels: 05 = $0.25.
By pressing the lower-left (PERM. PRESS)
button, there is an option of 1-199 nickels.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
VALUE OF COIN ?=/VALUE OF DRYER
TOP OFF
This represents the value of coin 2 in number
of nickels: 20 = $1.00.
PR MODELS: Factory default of $0.25.
For models using Enhanced Debit, this field
represents the value of top off in nickels.
By pressing the lower-left (PERM. PRESS)
button, there is an option of 1-199 nickels.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
ADD COINS OPTION
This option is either NOT SELECTED "00" or
SELECTED "AC." This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
The number in the display changes as the coins
are accepted.
Not Selected "00."
Selected "AC."
Press the lower-right (QUICK CYCLE) button
3 consecutive times to change this selection.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
ENHANCED PRICING OPTION (WASHER)
Not Selected "00."
Cycle-Based pricing enabled. This option
allows configuration of different prices for cold,
warm, and hot water wash cycles.
Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing
extra money. Set-up codes "H." and "h." will
be displayed only when this option is enabled.
Press the lower-right (QUICK CYCLE) button
to change this selection.
Press the lower-middle (DELICATES AND
KNITS) button once to advance to next code.
37