Maytag MLE20PRBZW1 Installation Instructions Manual page 24

ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connection Options
Power Cord
4-wire receptacle (NEMA Type 14-30R)
Direct Wire
4-wire direct
(127
3-wire receptacle (NEMA Type 10-30R)
3-wire direct
(89 mn
Connecting 4-Wire Connection: Power Supply Cord
IMPORTANT: A 4-wire connection is required where local
codes do not permit the use of 3-wire connections.
Standard Power Supply Cord Connectors
Flanged spade connector Ring Connector
Connecting Ground and Neutral Wires
1. Remove center terminal block screw and the ground wire
by removing the external ground connector screw.
2. Connect ground and neutral wire to center terminal block.
24
Connecting Direct Wire Ground
3. Connect ground wire (green or bare) with external ground
connector screw.
Connecting Remaining Wires
4. Connect remaining wires with outer terminal block screws.