Maytag MLE20PRBZW1 Installation Instructions Manual page 35

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any
programming. However, if you want to change the settings,
follow the "Set-Up Codes" guide.
The code at the beginning of each segment is the factory default
setting for the PD Models and is the same for the PR Models
unless noted otherwise.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
Set-Up Codes
Code Explanation
6 07
6 07
6 O0
REGULAR CYCLE PRICE (WASHER}
Represents the number of quarters (coin 1) to start
the washer; may adjust from 0-39. (See VALUE OF
COiN 1.) Advance from 0-39 by pressing the lower-
left (PERM. PRESS) button. Factory default of 7
quarters = $1.75.
PR MODELS ONLY: Factory default of 6 00,
or 0 quarters.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
606 REGULAR CYCLE PRICE (DRYER}
606
600
Represents the number of quarters (coin 1) needed
to start the dryer; may adjust from 0-39 (See
VALUE OF COiN 1). Advance from 0-39 by pressing
the upper-left (WHITES & COLORS) button. Factory
default of 6 quarters = $1.50.
PR MODELS: Factory default of 6 00, or 0 quarters.
Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
7 11 WASH LENGTH (WASHER}
711 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9-17 minutes by pressing the
lower-left (PERM. PRESS) button.
Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
705 REGULAR DRY TIME (DRYER}
705
745
PD MODELS: Represents the number of minutes
per quarter (coin 1).
Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper-left (WHITES & COLORS)
button, value adjusts from 1-99 minutes.
PR MODELS: Represents the cycle length for free
cycles. As example: "7 45" = 45 minutes.
Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
Code Explanation
8 00 ADDITIONAL RINSE OPTION (WASHER}
This option is either NOT SELECTED "00" or
SELECTED "ar."
8 00 Not Selected "00."
8 Ar Selected "ar." Cannot be combined with the Super
Cycle rinse option.
Press the lower-right (QUICK CYCLE) button
once to change this selection.
Press the lower-middle (DELICATES AND KNITS
button once to advance to next code.
800
800
8FC
9 00
9 00
9 0C
TYPE OF DRYER PRICING (DRYER}
Fixed Cycle with Top Off. For detailed description,
see "General Washer/Dryer User Information."
PR MODELS ONLY: Factory default of FC. Fixed
Cycle. For detailed description, see "General
Washer/Dryer User Information." Use the upper-
right (DELICATES) button to change this selection.
Press the lower-middle (DELICATES AND KNITS
button once to advance to next code.
CYCLE COUNTER OPTION
This option is either NOT SELECTED "00" or
SELECTED "0C."
Not Selected "00."
Selected "0C" and not able to be deselected.
Press the lower-right (QUICK CYCLE) button
3 consecutive times to select "0C." Once
selected "0C" it cannot be deselected.
Press the lower-middle (DELiCATES AND KNITS
button once to advance to next code.
If cycle counter (9 0C} is selected, the following is true:
1 00 Cycles in HUNDREDS 1 02 = 200
2 00 Cycles in ONES 2 2.5 = 25
TOTAL CYCLES = 225
This is "VIEW ONLY" and cannot be cleared.
Press the lower-middle (DELICATES AND KNITS) button once
to advance to next code.
35