3Com 4510G Configuration Manual page 1147

0 -rw- 1568 Jul 14 2008 11:54:04
30861 KB total (20956 KB free)
To access the file system of the master, use the name of the storage device; to access the file system
of a slave, use the name in the following format: Member-ID#Storage-device-name.
For example:
1) To access the test folder under the root directory of the flash on the master, perform the following
steps:
<Master> mkdir test
...
%Created dir flash:/test.
<Master> dir
Directory of flash:/
0 -rw- 10105088 Apr 26 2000 13:44:57
1 -rw- 2445 Apr 26 2000 15:18:19
2 drw-
30861 KB total (20961 KB free)
2) To create and access the test folder under the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> mkdir slot3#flash:/test
%Created dir slot3#flash:/test.
<Master> cd slot3#flash:/test
<Master> pwd
slot3#flash:/test
Or:
<Master> cd slot3#flash:/
<Master> mkdir test
%Created dir slot3#flash:/test.
3) To copy the test.bin file on the master to the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> pwd
slot3#flash:
//The above information indicates that the current working path is the root directory of the flash on
slave 3.
<Master> cd flash:/
<Master> pwd
flash:
// The above operations indicate that the current working path is the root directory of the flash on the
master.
<Master> copy test.bin slot3#flash:/
Copy flash:/test.bin to slot3#flash:/test.bin?[Y/N]:y
%Copy file flash:/test.bin to slot3#flash:/test.bin...Done.
Configuration file management
1) Configuration file synchronization
- Jul 14 2008 15:20:35
25-10
aa(20080714).cfg
test.bin
config.cfg
test