Front Panel; How To Schedule A Macro - GE Security SymSafe User Manual

52 SymSafe/SymSafe Pro
User Manual

Front Panel

Use this menu to assign a camera button (1-16) to a created Macro. Once assigned hold down the camera
button (2 sec.) to launch the macro.
Figure 31. The Schedule/Front Panel menu

How to schedule a macro

As an example, let's say that we want to turn camera 1 off at 7 p.m. and back on at 7 a.m. This requires that
you:
1. Create a macro to turn camera 1 off and name it Camera 1 Off.
a. From the Macros screen press enter to move to edit mode.
b. Select Create New Macro and press enter.
c. In the Name field press enter.
d. Use the on-screen keypad to enter Camera 1 Off. Press Done when finished.
e. Navigate to Begin Recording and press enter.
f. Select Camera and press enter. Select camera 1.
g. Press enter, select Input and press enter. Select Disable and press enter.
h. Press the Alarm button to finish recording the macro.
i. Select Save Macro and press enter.
2. Create a macro to turn camera 1 on and name it Camera 1 On.
a. From the Macros screen press enter to move to edit mode.
b. Select Create New Macro and press enter.
c. In the Name field press enter.