Ip Settings - GE Security SymSafe User Manual

IP Settings

Use this menu to setup the basic IP addresses and set the Ethernet password.
Figure 40. The Network/IP Settings menu
Table 26. The Network/IP Settings menu options
Menu options
Ethernet mode
IP Address
Subnet Mask
Gateway
Dynamic Name Server 1
Dynamic Name Server 2
Ethernet Password
Settings
Disabled, Static, DHCP, and PPPoE
Consult with a qualified network administrator or IT professional to
configure these settings if DHCP is not selected.
Consult with a qualified network administrator or IT professional to
configure these settings if DHCP is not selected.
Consult with a qualified network administrator or IT professional to
configure these settings if DHCP is not selected.
Consult with a qualified network administrator or IT professional to
configure these settings if DHCP is not selected.
Consult with a qualified network administrator or IT professional to
configure these settings if DHCP is not selected.
Enter 4 to 8 characters to enable.
Chapter 4
Programming the SymSafe
61