GE Security SymSafe User Manual page 63

d. Use the on-screen keypad to enter Camera 1 On Press Done when finished.
e. Navigate to Begin Recording and press enter.
f. Select Camera and press enter. Select camera 1.
g. Press enter, select Input and press enter. Select Live + Rec. and press enter.
h. Press the Alarm button to finish recording the macro.
i. Select Save Macro and press enter.
3. Schedule macro Camera 1 Off.
a. Navigate to the Schedule menu and press enter on New Schedule to move to edit mode.
b. Press enter to enable the schedule.
c. Move the cursor to the Macro command and press enter.
d. Select Camera 1 Off and press enter.
e. Move the cursor to the Time command and press enter.
f. Use the arrow buttons to select 7 p.m. and press enter
g. Move the cursor to the Save Schedule Macros command and press enter.
4. Schedule macro Camera 1 On.
a. Navigate to the Schedule menu and press enter on New Schedule to move to edit mode.
b. Press enter to enable the schedule.
c. Move the cursor to the Macro command and press enter.
d. Select Camera 1 On and press enter.
e. Move the cursor to the Time command and press enter.
f. Use the arrow buttons to select 7 a.m. and press enter
g. Move the cursor to the Save Schedule Macros command and press enter.
The macros Camera 1 Off and Camera 1 On are now scheduled to run at their selected times.
Chapter 4
Programming the SymSafe
53