The Symbrowser Webserver - GE Security SymSafe User Manual

90 SymSafe/SymSafe Pro
User Manual

The SymBrowser Webserver

The SymSafe has an integrated WebServer interface. The WebServer provides you the means to remotely
configure, upgrade, and view information about the SymSafe. The default IP address from the factory is
192.168.1.82. To disable the SymBrowser go to
the default 80 to 0.
To access the web interface:
1. Launch Internet Explorer (version 5.5 or later) on any local Internet connected PC or laptop.
2. Type in the unit's IP address (192.168.1.82) or hostname (see network settings page) in the address
field and click enter.
Note: When launching, SymBrowser checks your system for the correct files. If they are not detected, SymBrowser
will attempt to load them. Accept all General Electric signed content to allow the files to be loaded.
3. The Enter Network Password screen will appear. Enter your user name and password (PIN). See
Passwords
4. The SymSafe's SymBrowser home page window should appear.
Figure 64. SymSafe SymBrowser home page
On this page you will find links for SymBrowser, Search, User's, Configure, and Info.
Note: The SymBrowser is discussed in detail at the end of this chapter.
on page 8 for the default factory passwords.
Services on page 64 and change the HTTP port number from