Weider Wedier Pro 9635 User Manual page 6

2. Slide the VKR Upright (74) and the Leg Press
Upright (56) onto the indicated M8 x 62mm
Carriage Bolts (1) in the Stabilizer (5). The
high side of the brackets on the VKR
Upright and Leg Press Upright should be
on the side shown. Hand-tighten four M8
Nylon Locknuts (3) onto the Carriage Bolts.
Do not tighten the Locknuts yet.
Attach the Rubber Bumper (91) to the Leg
Press Upright (56) with the M4 x 13mm Self-
tapping Screw (87) and an M4 Washer (76).
3. Slide the Front Upright (42) onto the M8 x
62mm Carriage Bolts (1) in the Base (4).
Handtighten an M8 Nylon Locknut (3) onto
each Carriage Bolt. Do not tighten the
Locknuts yet.
2
74
3
3
1
3
6
87
High Sides
76
of Brackets
91
56
3
3
5
1
42
3
4
1