Weider Wedier Pro 9635 User Manual page 16

31. Wrap the Military Press Cable (72) over a
90mm Pulley (15). Attach the Pulley to the
Top Frame (55) with an M10 x 47mm Bolt
(12) and an M10 Nylon Locknut (21).
See the inset drawing. Wrap the Military
Press Cable (72) under a 90mm Pulley (15).
Attach the Pulley and a Cable Trap (66) to the
bracket on the Stabilizer (5) with an M10 x
47mm Bolt (12) and an M10 Nylon Locknut
(21). Make sure that the Cable Trap is
turned to hold the Cable in place.
32. Wrap the Military Press Cable (72) over a
90mm Pulley (15). Attach the Pulley and a
Cable Trap (66) to the Pivot Arm (101) with an
M10 x 92mm Bolt (88), an M10 Washer (9),
and an M10 Nylon Locknut (21). Make sure
that the Locknut is on the side shown and
that the Cable Trap is positioned to hold
the Cable in place.
31
55
15
21
72
32
88
66
15
16
12
72
21
Bracket
66
15
5
9
101
72
21
12