Weider Wedier Pro 9635 User Manual page 14

25. Route the Low Cable (23) under a 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the lower hole in the Front
Upright (42) with an M10 x 92mm Bolt (88),
an M10 Washer (9), and an M10 Nylon
Locknut (21). Make sure that the Cable Trap
is turned to hold the Cable in place.
26. Route the Low Cable (23) under the 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the upper hole in the Press
Frame (17) with an M10 x 83mm Bolt (67), an
M10 Washer (9), and an M10 Nylon Locknut
(21). Make sure that the Cable Trap is
turned to hold the Cable in the groove of
the Pulley.
27. Route the Low Cable (23) under a 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the upper hole in the Front
Upright (42) with an M10 x 92mm Bolt (88),
an M10 Washer (9), and an M10 Nylon
Locknut (21). Make sure that the Cable Trap
(66) is turned to hold the Cable in place
25
9
88
26
27
42
9
88
14
42
66
21
15
23
23
17
67
9
15
66
21
23
15 66
21