Weider Wedier Pro 9635 User Manual page 21

45. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE WEIGHT SYSTEM, beginning on page 22 of this manual.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAMS on page 26 and 27 of this manual for proper cable routing. If there is any slack in the
cables, you will need to remove it by tightening the cables. See TROUBLESHOOTING AND MAINTE-
NANCE on page 25.
21