Pvc Connection Status - Paradyne iMarc SLV Operation Manual

PVC Connection Status

PVC connection statuses are selected from the Status menu.
The PVC Connection Status screen shows all PVC connections and management
links configured for the unit. The source and primary destination are shown, along
with an alternate destination for backup. When a primary destination DLCI was
assigned to a Backup Group, the Backup Group designation appears next to the
DLCI number. In the example below, DLCIs 502 and 504 had been assigned to
Backup Group A.
PVC Connection Status Screen Example
For units with ISDN backup capability, the DBM provides backup support through
the unit's ISDN DBM interface. For units without ISDN backup capability, an
alternate network DLCI can be used to backup user data. For additional
information about the Alternate Destination fields, see Configuring PVC
Connections in the
If the No PVC Connections message appears instead of a list of PVC
connections, no PVC connections have been configured yet.
9000-A2-GB33-20
Main Menu→Status→PVC Connection Status
main/status/connections
Device Name: Node A
Source Primary Destination
Link DLCI EDLCI Link
Port-1 201 Net1-FR1
Port-2 202 Net1-FR1
Port-1 100 Net1-FR1
Port-2 204 Net1-FR1
Mgmt PVC Tampa Net1-FR1
Port-2 206 Net1-FR1
Port-1 207 Net1-FR1
Port-1 208 Net1-FR1
Port-1 209 Net1-FR1
Port-1 210 Net1-FR1
Port-1 214 Net1-FR1
--------------------------------------------------------------------------------
ESC for previous menu
Refresh PgUp PgDn
iMarc SLV Configuration
May 2003
PVC CONNECTION STATUS
DLCI EDLCI Status
300 PM Active
1001 1 Active
1001 4 Active
1001 2 Active
1001 5 Active
1001 3 Active
1001 Active
502A Active
504A Inactive Colorado
505 Inactive Tampa
506 Active
MainMenu
Reference.
3. Status and Statistics
9128-II
5/13/2001 23:32
Page 1 of 2
Alternate Destination
Link DLCI EDLCI Status
Colorado 400 Inactive
302 Active
304 Active
Exit
3-45