Problem Indicators - Paradyne iMarc SLV Operation Manual

5. Troubleshooting

Problem Indicators

The unit provides a number of indicators to alert you to possible problems:
5-2
Indicators . . .
LEDs
Health and Status
Performance statistics
Alarm conditions that will
generate an SNMP trap
SNMP traps
May 2003
See . . .
Viewing LEDs and Control Leads
Chapter 3, Status and Statistics, as well as the user
interface screen.
Main Menu→Status→
Display LEDs and Control LEDs
Table 3-6, Health and Status Messages,
Status and Statistics.
Main Menu→Status→System and Test Status
Messages also appear at the bottom of any menu-driven
user interface screen.
Performance Statistics in Chapter 3, Status and Statistics,
to help you determine how long a problem has existed.
Alarms on page 5-7.
iMarc SLV SNMP Reference.
Traps supported include warm-start, authentication-failure,
enterprise-specific (those specific to the unit), link-up, and
link-down.
and LED Descriptions in
in Chapter 3,
9000-A2-GB33-20