Network Atm Loopback (9783, 9788) - Paradyne iMarc SLV Operation Manual

Network ATM Loopback (9783, 9788)

A Network ATM Loopback is a nondisruptive test that can be run on a Virtual
Channel Connection (VCC) for an ATM link on the network interface.
Select an enabled ATM link so available VCCs can be selected for testing on the
link.
Network ATM Loopback Tests Screen Example
The ATM Loopback causes the iMarc device to send either a segment or
end-to-end loopback packet toward the network on the selected VCC, then wait for
a response.
A RndTrip Time(ms) message appears in the Result column when a response
is received within 5 seconds, indicating that the iMarc unit at the remote end is
alive (operational and connected), and the round trip (RT) time is shown in
milliseconds (ms), with a resolution of 1 ms. If a response is not received within
5 seconds, No Response appears in the Result column and the test is
automatically stopped.
9000-A2-GB33-20
main/test/network_atm
Device Name: Node A
VPI,VCI: 0,35
Loopback Type: Segment
Destination Segment ID: FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF
Test Command
ATM Ping: Start
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
May 2003
Net1-ATM LOOPBACK TESTS
Status Result
Inactive RndTrip Time(ms)
5. Troubleshooting
9783-C-SLV
2/26/2001 08:03
Reset
99999
MainMenu Exit
5-27