Limiting Telnet Or Ftp Access Over The Ts Access Management Link - Paradyne iMarc SLV Operation Manual

2. Security and Logins

Limiting Telnet or FTP Access Over the TS Access Management Link

Procedure
To limit Telnet or FTP access when the session is on the TS Access Management
Link:
See Configuring Telnet and/or FTP Session Support or Configuring Node IP
Information in the
these configuration options.
2-8
1. Select the Telnet and FTP Session options.
Main Menu→Configuration→Management and Communication→
Telnet and FTP Sessions
2. Disable Telnet Session and/or FTP Session, as appropriate.
3. Return to the Management and Communication menu, and select Node IP.
4. Set the following configuration options, as appropriate.
To . . .
Disable access via the TS
Access Management Link
Assign an access level to the
TS Access Management Link
5. Save your changes.
iMarc SLV Configuration Reference
May 2003
Set the configuration option . . .
TS Access Management Link to None.
TS Access Management Link's Access Level to
Level-2 or Level-3.
NOTE: Regardless of a user's login access level, a
user cannot operate at a level higher than the
access level specified for the session (e.g., if a user
has a Level-1 login and Level-2 telnet access has
been set, the Level-1 user can only operate as a
Level-2 user).
If you are going to allow users to configure the unit,
keep the access at Level-1.
for more information about
9000-A2-GB33-20