Controlling SNMP Access
The iMarc unit supports SNMP Version 1, which provides limited security through
the use of community names. There are three methods for limiting SNMP access:
Disabling SNMP Access
When the SNMP access is disabled, the iMarc unit will not respond to SNMP
messages.
Procedure
To disable SNMP access:
See Configuring General SNMP Management in the
Reference
options.
9000-A2-GB33-20
Disabling SNMP access.
Assigning SNMP community names and the access type.
Assigning IP addresses of those NMSs that can access the unit.
1. Select the General SNMP Management options.
Main Menu→Configuration→Management and Communication→
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
for more information about General SNMP Management configuration
May 2003
2. Security and Logins
iMarc SLV Configuration
2-9