Controlling Router Cli Access; Access Levels (Command Modes) - Paradyne iMarc SLV Operation Manual

2. Security and Logins

Controlling Router CLI Access

iMarc SLV Routers can be managed from an NMS using SNMP, or from the
router's command line interface (CLI). There are two methods to access the
command line interface:
„
„
The router accepts one CLI login session at a time and is configured at the factory
without a default login ID and password. To provide login security to the system,
configure a login ID and password.
When a local console connection is first established, a login prompt appears. If the
Device Name field has been configured via the Control menu
(Control Menu→System Information), the login prompt displays the device name.
For example, a device name of Largo is shown as:
See

Access Levels (Command Modes)

There is one login ID and several levels of privileges for the router's CLI. Your user
account can be configured with one user name and different passwords for:
„
„
Refer to the
each command line entry.
2-14
Local access at the router through the COM port, or
Access via a Telnet session.
Telnet access defaults to Administrator level. If the current login is at the
Operator level, only Operator level access is available for the session. Telnet
access is always enabled.
Largo>
Creating a Login on page 2-12 for security information for each Login ID.
Operator. The Operator has read-only access to display device information
with no modification permission and limited access to diagnostic functions.
With a device name of Largo, the prompt appears as Largo>.
Administrator. The Administrator has several levels of access to the router's
CLI. The # sign in the following prompts indicates Administrator access level.
Display Prompt with Device Name of Largo Administrator Access Levels
Largo #>
Largo(config) #
Largo(config-if) #
Largo(config-subif) #
Largo(config-dhcp) #
iMarc SLV Router Command Line Interface
May 2003
Standard (same as Operator)
Configuration
Configuration Interface
Configuration Sub-Interface
Configuration DHCP Pool
for access level details for
9000-A2-GB33-20