Selecting An Entry From A Menu; Switching Between Screen Areas - Paradyne iMarc SLV Operation Manual

1. User Interface and Basic Operation

Selecting an Entry from a Menu

Procedure
To select an entry from a menu:
Procedure
To return to a previous screen, press the Escape (Esc) key until you reach the
desired screen.

Switching Between Screen Areas

Use Ctrl-a to switch between screen areas (see the example in
page 1-4).
Procedure
To switch to the function keys area:
To return to the screen area, press Ctrl-a again.
1-8
1. Tab or press the down arrow key to position the cursor on a menu selection, or
press the up arrow key to move the cursor to the bottom of the menu list.
Each menu selection is highlighted as you press the key to move the cursor
from position to position.
2. Press Enter. The selected menu or screen appears.
1. Press Ctrl-a to switch from the screen area to the function keys area.
2. Select either the function's designated (underlined) character or Tab to the
desired function key.
3. Press Enter. The function is performed.
May 2003
Main Menu on
9000-A2-GB33-20