Miter Gauge - Grizzly G5045 Instruction Manual

Miter Gauge

The miter gauge provides angle-adjustable sup-
port for workpieces while cross-cutting with the
Model G5045 Table Saw. To adjust the miter
gauge:
1. Loosen the clamp knob so the gauge is free
to rotate.
2. Slide the miter gauge into one of the two
miter slots.
3. Using a square as a guide, adjust the miter
gauge until its face is perpendicular to the
miter slot. See Figure 16.
4. If the pointer does not indicate zero, loosen
the screw and re-align the pointer. Tighten
screw.
Figure 16. Aligning miter gauge blade slot.
G5045 10'' Bench Top Table Saw -15-