Table of Contents
Advertisement
7. Using a straightedge as a guide, align the
splitter with he saw blade. See Figure 12.
Use care to ensure that alignment is exact.
Failure to do so will result in difficulties
when ripping or crosscutting.
Figure 12. Aligning the splitter with the blade.
8. Once the splitter is aligned, tighten all fas-
teners securely.
9. Check splitter alignment after tightening.
G5045 10'' Bench Top Table Saw
Dust Collection Port
The Model G5045 10" Bench Top Table Saw is
equipped with a dust which can be attached to
standard 2
1
⁄
" dust collection systems. To connect
2
your table saw to a dust collection system:
1. Insert the end of a standard 2
dust collection hose or shop vac hose into
the dust port at the base of the table saw.
See Figure 13.
2. Turn on the saw and the vacuum or dust
collection system and begin operation.
Figure 13. Attaching dust collection hose.
⁄
" flexible
1
2
-13-
Advertisement
Table of Contents
