Table of Contents
Advertisement
For Your Own Safety Read Instruction
Manual Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manu-
al uses a series of symbols and signal words which are intended to convey the level of importance of
the safety messages. The progression of symbols is described below. Remember that safety messages
by themselves do not eliminate danger and are not a substitute for proper accident prevention mea-
sures.
NOTICE
Safety Instructions For Power Tools
1.
KEEP GUARDS IN PLACE and in working
order.
2.
REMOVE
ADJUSTING
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.
3.
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
4.
DON'T USE IN DANGEROUS ENVIRON-
MENT. Don't use power tools in damp or
wet locations, or where any flammable or
noxious fumes may exist. Keep work area
well lighted.
-2-
SECTION 1: SAFETY
Indicates an imminently hazardous situation which, if not
avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, MAY result in minor or moderate injury. It may also
be used to alert against unsafe practices.
This symbol is used to alert the user to useful information
about proper operation of the equipment.
KEYS
5.
KEEP
AWAY. All children and visitors should be
kept a safe distance from work area.
AND
6.
MAKE WORK SHOP CHILD PROOF with
padlocks, master switches, or by removing
starter keys.
7.
DON'T FORCE TOOL. It will do the job
better and safer at the rate for which it was
designed.
8.
USE RIGHT TOOL. Don't force tool or
attachment to do a job for which it was not
designed.
CHILDREN
AND
G5045 10'' Bench Top Table Saw
VISITORS
Advertisement
Table of Contents
