Connecting A Crash Cymbal (Cy-8: Sold Separately); Connecting A V Hi-Hat (Vh-11: Sold Separately) - Roland V-DRUMS TD-9 Quick Start Manual

Connecting a crash cymbal
(CY-8: sold separately)
Use a stereo cable to connect the CY-8 to the TD-9 as shown in
the illustration.
1.
Attach the Cymbal Mount to the
stand.
2.
Connect the cable included with the
pad to the TD-9's CRASH2 jack.

Connecting a V hi-hat (VH-11: sold separately)

CONTROL OUT
HHC
jack
Other options
In addition to items proposed here, you can expand your system with other options. For details,
talk with your local Roland dealer or check out the Roland website.
http://www.roland.com/V-Drums/
Dedicated V-Drums setup mat
TDM-20/10
Cymbal Mount
MDY-10U (sold separately)
MDY series (sold separately)
from CY-8
Use the existing cables to connect the VH-11 to
the TD-9 as shown in the illustration.
1.
TRIGGER OUT
2.
jack
HH
*
*
can be used as a splash or crash cymbal. Mount it using
an Cymbal Mount (MDY-12 : sold separately) or Cymbal
Parts Set (CYM-10 : sold separately).
The V hi-hat is a prime example
of Roland's V-Drums technology
The main feature of the V hi-hat (VH-
11) is the design that creates the
movement, weight and playing feel of
a acoustic hi-hat.
The VH-11 can be mounted on a just
about any hi-hat stand, allowing
Cymbal Mount
normal bow/edge playing technique,
smooth transition between the open
and closed position and even foot
splashes.
Connect the HH (hi-hat trigger) cable
to the TRIGGER OUT jack.
Connect the HHC (hi-hat control) cable
to the CONTROL OUT jack.
The hi-hat stand is sold separately.
The original cymbal pad (CY-5) used for the hi-hat
Stereo monitor headphones
RH series
15