Making Detailed Settings; Adjust The Pad Sensitivity; Changing The Type Of Pad; Changing Midi Note Number Of The Pad - Roland TD-1DMK Owner's Manual

Making Detailed Settings

1.
Press the [Select] button to select Drums mode .
2.
Long-press the [ ] (metronome) button .
* The mode lamp blinks.

Adjust the Pad Sensitivity

3.
Press the [Select] button to blink Drums mode lamp .
4.
Play the pad or kick pedal whose sensitivity you want to
change .
5.
Use the [-] [+] buttons to adjust the sensitivity .
The display shows the sensitivity value. Higher sensitivity allows
the pad to produce a loud volume even when played softly. Lower
sensitivity will keep the pad producing a low volume even when
played forcefully.
6.
Press the [ ](metronome) button to complete the setting .

Changing the Type of Pad

If you use a separately sold kick trigger or mesh pad, you'll need to
change the pad type.
3.
Press the [Select] button to blink Tempo mode lamp .
4.
Play the pad or kick pedal .
5.
Use the [-] [+] buttons to change the type .
Display Type of Pad
Kick pedal
(TD-1 default value)
1
KD-9
2
KT-9, KT-10
3
Snare pad
(TD-1K default value)
S 1
PDX-8, PDX-6 (except TD-1K)
S 2
6.
Press the [ ] (metronome) button to complete the setting .

Changing MIDI Note Number of the Pad

3.
Press the [Select] button to blink Coach mode lamp .
4.
Play the pad whose note number you want to change .
The display shows the note number.
5.
Use the [-] [+] buttons to change the setting .
Value: 0–127, OFF
6.
Press the [ ] (metronome) button to complete the setting .
Note numbers (default)
Pad
KIK
SNR (Head)
SNR (Rim)
T1
T2
10
Note number
36
38
40
48
45
Pad
T3
HH open (Bow)
HH open (Edge)
HH closed (Bow)
HH closed (Edge)
HH foot closed
CR1 (Bow)
CR1 (Edge)
CR2 (Bow)
CR2 (Edge)
RD (Bow)
RD (Edge)
MIDI channel: 10
* The TD-1 does not receive any MIDI messages.

Changing the Time of Auto Off

The TD-1 is set to automatically power-off when a certain minutes
have elapsed since it was last played or operated. When you want
to turn the power on, press the [L] (power) button once again. You
can also make settings so that the power is not off automatically.
3.
Press the [Select] button to blink Song mode lamp .
4.
Use the [-] [+] buttons to change the time of Auto Off .
Display Explanation
The power will not turn off automatically.
OFF
The power will turn off automatically when 10 minutes have
10
elapsed.
The power will turn off automatically when 30 minutes have
30
elapsed.
The power will turn off automatically when four hours have
240
elapsed.
5.
Press the [ ] (metronome) button to complete the setting .

Restoring the Factory Settings

The "Factory Reset" operation returns all settings stored in the TD-1
to their factory-set condition.
Note
The settings stored in the TD-1 will be lost when you execute a
factory reset.
1.
While pressing the [-] [+] buttons, press the [L] (power)
button to turn the power on .
The display shows as follows.
2.
Press the [ ] (metronome) button to execute a factory
reset .
To cancel a factory reset, press the [L] (power) button and turn the
power off.
Note number
43
46 *a
26 *b
(42) *a-4
(22) *b-4
(44) *a-2
49
55
57
52
51
59