Table of Contents
Advertisement
Making Overall Settings for the TAIKO-1
This section shows you how to configure the overall settings for
the TAIKO-1, including the settings for the OUTPUT/PHONES jack,
footswitch and more.
1 .
Press
"MENU"
(F2 button)
2 .
Use the
[H] [I]
buttons to select
press
"SELECT"
(F2 button)
The OTHERS screen appears.
3 .
Use the
[H] [I]
buttons to select the item, and then
press
"SELECT"
(F2 button)
Configuring the OUTPUT/PHONES Jack (Output Settings)
Configuring the Pedal Jacks and Shortcut Settings (Control Settings)
MIDI-Related Settings (Global MIDI)
Configuring the Master Equalizer (Master EQ)
Configuring the Master Compressor (Master Comp)
Setting the Screen and AUTO OFF Function (LCD/Auto Off)
Viewing Information for This Instrument (Version Info)
Returning to the Factory Settings (Factory Reset)
Configuring the OUTPUT/PHONES Jack
(Output Settings)
1 .
On the OTHERS screen, select
press
"SELECT"
(F2 button)
The OUTPUT SETTINGS screen appears.
2 .
Use the
[H] [I]
buttons to select the item, and then
use the
[+] [-]
buttons to change the setting .
Parameter
Value
[ H ] [ I ] buttons
[+] [-] buttons
Output Mode
Phones, Speaker
Output Gain
-12–+12
[dB]
Low Cut Sw
OFF, ON
Low Cut Freq
20–200
[Hz]
3 .
Press the F1 button several times to return to the top
screen .
36
.
"Others,"
and then
.
.
"Output Settings"
.
Explanation
Configures the optimum sound to match
the output destination.
*
When this is set to
"Speaker,"
the Ambience
always remains off.
Adjusts the output level.
*
This is settings is common to all outputs, aside
from Bluetooth audio.
Set this to
"ON"
to cut the low frequencies.
When
"Low Cut Sw"
is ON, use this
parameter to set the low-range frequencies
to cut.
Configuring the Pedal Jacks and Shortcut Settings
(Control Settings)
You can assign functions such as kit switching or set list switching
to a footswitch (BOSS FS-5U, FS-6; sold separately) connected to the
TAIKO-1, and assign functions such as pitch, volume, or ji-uchi tempo
to an expression pedal (EV-5; sold separately).
You can also change the function (shortcut) of the
button.
1 .
On the OTHERS screen, select
press
"SELECT"
The CONTROL SETTINGS screen appears.
page 36
page 36
2 .
Use the
[H] [I]
page 38
use the
[+] [-]
page 38
page 39
Parameter
[ H ] [ I ] buttons
page 39
page 39
page 40
and
Foot Sw1
Foot Sw2
Pedal1
Pedal2
(Others)
[
"Control Settings"
.
(F2 button)
buttons to select the item, and then
buttons to change the setting .
Value
Explanation
[+] [-] buttons
You can assign functions to a footswitch
(BOSS FS-5U, FS-6; sold separately)
connected to this instrument.
Connecting an FS-5U
Stereo 1/4" phone type
1/4" phone type
× 2
RING
TIP
SW1
SW2
Polarity switch
Refer to
"Functions
that can be
*
If you use a mono cable to connect a single
assigned to the
FS-5U, it operates as SW2.
footswitch"
(p.
*
The FS-5L cannot be used.
37).
Connecting an FS-6
Stereo 1/4" phone type
Stereo 1/4" phone type
SW1
SW2
Polarity switch
Refer to
"Functions
You can assign the functions to an
that Can Be
expression pedal (EV-5) or pedals
Assigned to the
connected to this instrument.
Pedals"
(p. 37).
]
(TOMOE)
and
Advertisement
Table of Contents
