Overall Settings For The Td (Options) - Roland TD-11 Owner's Manual

Overall Settings for the TD (Options)

For details on the procedure, refer to "Basic procedure" (p. 34).
Parameter
Display Contrast
Display Brightness
Illumination Ring
Illumination Kit Buttons
Auto Off
USB Audio Volume
Write Protect
Value Description
Adjusts the contrast of the display.
MEMO
1–10
In the DRUM KIT screen, you can adjust this by holding down the [MENU] button and
turning the value dial.
1–10 Adjusts the brightness of the display.
You can make the ring of the value dial light up in synchronization with your performance.
OFF The ring will not light.
DYNAMIC The ring will light according to the dynamics of your playing.
KICK The ring will light when you play the kick drum.
TEMPO The ring will light in synchronization with the tempo setting.
You can make the [DRUM KIT] buttons light up.
OFF The [DRUM KIT] buttons will not light.
ON The [DRUM KIT] buttons will light.
When shipped from the factory, the TD is set to automatically power-off when 30 minutes have elapsed since
it was last played or operated. Approximately five minutes before the power turns off, a message will appear
in the display.
OFF The power will not turn off automatically.
10 MINS The power will turn off automatically when 10 minutes have elapsed.
30 MINS The power will turn off automatically when 30 minutes have elapsed.
4 HOURS The power will turn off automatically when four hours have elapsed.
Adjusts the volume when using the TD to listen to audio data played back from your
0–100
computer.
OFF, ON If the Write Protect setting is ON, it will not be possible to save any settings.
Settings for the Entire TD (SYSTEM)
35