Operation - Mira Jump 96Va Installation And User Manual

8.5, 9.5, & 10.8 kw
Table of Contents

Advertisement

WARNING - This shower can deliver scalding temperatures if not operated,
installed or maintained in accordance with the instructions, warnings and
cautions contained in this guide and on or inside the appliance.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1.
Make sure that you fully understand how to operate this shower before use, read all
operating instructions and retain this guide for future reference.
2.
This shower is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of the shower by a person
responsible for their safety.
3.
Children should be supervised to ensure that they do not play with the shower.
4.
DO NOT switch the shower on if there is a possibility that the water in the shower is frozen.
5.
DO NOT switch the shower on if water leaks from the shower unit. Isolate the electrical
supply to the shower immediately.
6.
DO NOT switch the shower on if the case appears to be damaged or incorrectly fitted.
Isolate the electrical supply to the shower immediately.
7.
Switch off the appliance at electrical isolating switch when not in use. This is for safety
and is recommended with all electrical appliances.
8.
DO NOT connect the outlet of the shower to any tap, control valve, trigger handset
or showerhead other than those specified for use with this shower. Only Kohler Mira
recommended accessories should be used.
9.
Always check the water temperature before entering the shower. Sunburn or skin
conditions can increase your sensitivity to hot water. Make sure that you set the shower
to a cooler temperature.
10. DO NOT operate the temperature control rapidly, allow 10 – 15 seconds for the
temperature to stabilise before use.
11. Care is required if the shower is turned off and back on during showering as this may
result in unstable temperature. Ensure temperature has stabilised before re-using shower.
12. The showerhead must be de-scaled regularly, refer to the user maintenance section
towards the rear of this guide for details.
13. The shower hose must be checked regularly and replaced if damaged, refer to the user
maintenance section towards the rear of this guide for details.
14. Do not store bathroom items on top of the shower unit (i.e. Shampoo or shower gel
containers).
15. The shower must be operated and maintained in accordance with the requirements of
this guide.
16. If any of the following conditions occur, isolate the electricity and water supplies and
contact Kohler Mira Customer Service.
If the case is damaged or the cover is not correctly fitted and water has entered
the shower case.
If the shower begins to make an odd noise, smell or smoke.
If the shower shows signs of a distinct change in performance indicating a need
for maintenance.

OPERATION

18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jump 96waJump 96xa

Table of Contents