Troubleshooting Flow Chart - Kohler Command PRO ECH630 Service Manual

Code: 0563
Component: System Voltage
Fault: System Voltage High
Condition: Faulty voltage regulator or shorted
connection.
Possible Causes:
1. Faulty Rectifi er-Regulator
2. Bad Stator.
3. Bad Batt ery.
Code: 61
Fault: End of Code Transmission

Troubleshooting Flow Chart

The following fl ow chart provides an alternative
method of troubleshooting the EFI system. The chart
will enable you to review the entire system in about
10-15 minutes. Using the chart, the accompanying
diagnostic aids (listed aft er the chart), and any
signaled fault codes, you should be able to quickly
locate any problems within the system. See Figure
5-30.
Section 5
EFI Fuel System
5.35
5