Kohler Command PRO ECH630 Service Manual page 148

Section 10
Reassembly
2. Make sure the thrott le linkage, linkage spring,
and black linkage bushing are connected to the
governor lever and to the thrott le lever on the
thrott le body. See Figure 10-78.
Throttle Throttle
Linkage Linkage
Spring Spring
Figure 10-78. Throttle Bushing, Linkage, and
Spring Locations.
Install Throttle Control Panel
1. Secure the thrott le control panel to the crankcase
with the four thread forming screws. See Figure
10-79.
NOTE: A detailed view of the thrott le control
panel assembly is provided in Figure 10-81
to identify the various parts and aid in
reassembly.
Throttle Control Panel Assembly
Detail
Item Description
1 Bracket, speed control
2 Clamp, cable
3 Lever, throttle control (top)
4 Lever, throttle actuator (bottom)
5 Screw, M5x0.8x20
6 Washer, spring
7 Washer, fl at (2)
8 Spring, return
9 Nut, M5x0.8 lock
Figure 10-81. Throttle Control Panel Detail.
10.22
Throttle Throttle
Linkage Linkage
Throttle Throttle
Linkage Linkage
Bushing Bushing
Figure 10-79. Throttle Control Panel Hardware
Location.
2. Att ach governor spring to the previously marked
hole on the governor lever. See Figure 10-80.
Figure 10-80. Connecting Governor Spring to
Governor Lever.
2
1
8
1
Mounting Mounting
Screws Screws
5 2
4
3
5
6
7
9
4