Figure 8-24. Disconnecting Intake Air Temperature
Sensor.
3. Disconnect the thrott le position sensor connector.
See Figure 8-25.
Figure 8-25. Disconnecting Throttle Position
Sensor.
4. Disconnect the vent hose from the thrott le body.
See Figure 8-26.
Figure 8-26. Disconnecting Vent Hose.
5. Slide the thrott le body off the intake manifold.
Remove Electronic Control Unit (ECU)
1. Remove the two hex fl ange screws securing the
ECU to the bracket. See Figure 8-27.
Figure 8-27. Removing ECU Fasteners.
2. Disconnect the Black and Grey electrical
connectors from the ECU. See Figure 8-28.
Figure 8-28. Disconnecting the ECU Electrical
Connectors.
Remove Electronic Control Unit Bracket
and Electric Starter Motor
1. Disconnect the leads from the starter.
2. Remove the two hex fl ange screws. See Figure 8-29.
Mounting
Bolts
Figure 8-29. Removing Electric Starter Motor.
Section 8
Disassembly
8
8.7