Kohler Command PRO ECH630 Service Manual page 22

Section 2
Tools & Aids
Tools (Continued)
Description
Hydraulic Valve Lift er Tool
To remove and install hydraulic lift ers.
Ignition System Tester
For testing output on all systems, including CD.
Off set Wrench (K & M Series)
To remove and reinstall cylinder barrel retaining nuts.
Oil Pressure Test Kit
To test and verify oil pressure.
Rectifi er-Regulator Tester (120 volt current)
Rectifi er-Regulator Tester (240 volt current)
Used to test rectifi er-regulators.
Individual Components Available
CS-PRO Regulator Test Harness
Special Regulator Test Harness with Diode
Spark Advance Module (SAM) Tester
To test the SAM (ASAM and DSAM) on engines with SMART-SPARK™.
Starter Servicing Kit (All Starters)
To remove and reinstall drive retaining rings and brushes.
Individual Component Available
Starter Brush Holding Tool (Solenoid Shift )
Tachometer (Digital Inductive)
For checking operating speed (RPM) of an engine.
Vacuum/Pressure Tester
Alternative to a water manometer.
2.2
Source/Part No.
Kohler 25 761 38-S
Kohler 25 455 01-S
Kohler 52 455 04-S
Kohler 25 761 06-S
Kohler 25 761 20-S
Kohler 25 761 41-S
Design Technology Inc.
DTI-031
DTI-033
Kohler 25 761 40-S
SE Tools KLR-82411
SE Tools KLR-82416
Design Technology Inc.
DTI-110
Kohler 25 761 22-S