Os8-Gni-U24 Front Panel - Alcatel OMNISWITCH 8800 Getting Started Manual

OS8-GNI-U24 Front Panel

Module Status LEDs
OK1. Hardware Status. Displays solid
green when powered on and the GNI has
passed hardware diagnostic tests. Displays
solid amber when powered on and the GNI
has failed hardware diagnostic tests.
OK2. Software Status. Blinks green when
the GNI is operational and has successfully
loaded software. Displays solid amber
when powered on and the GNI has failed to
load software.
Gigabit Ethernet Port LEDs
ACT. Activity Status. Flashes green when
data is transmitted or received on the corre-
sponding Gigabit Ethernet port.
LINK. Link Integrity Status. Displays solid
green when a fiber cable connection exists
at the corresponding Gigabit Ethernet port.
March 2005
OK1
OK2
1 13
Module
Status
2 14
LEDs
3 15
4 16
5 17
6 18
7 19
8 20
9 21
10 22
11 23
12 24
Gigabit Ethernet Ports
The OS8-GNI-U24 module provides twenty-four (24)
MiniGBIC slots. These slots support the following
MiniGBIC types:
•
MINIGBIC-SX—1000BaseSX multimode fiber,
supports distances up to 550 meters; uses LC
connectors
•
MINIGBIC-LX—1000BaseLX single mode
fiber, supports distances up to 10 km; uses LC
connectors
•
MINIGBIC-LH-70—1000BaseLH long haul
fiber, supports distances up to 70 km; uses LC
connectors.
Note
Refer to your OmniSwitch 8800 Hardware Users
Guide for information on proper handling of LC con-
nectors and fiber-optic cable.
Hardware Basics 61