Panel Display; Port State Display - Alcatel OMNISTACK 8008 User Manual

Web Interface

Panel Display

The Web agent displays an image of the switch's ports, showing port links and
activity. Clicking on the image of a port displays statistics and configuration
information for the port. Clicking on the image of the serial port (labeled "Mgmt")
displays the Console Configuration screen. Clicking on any other part of the front
panel displays Switch Information as described on page 3-7.

Port State Display

Click on any port to display a summary or port status as shown below, as well as
Etherlike statistics (page 3-39) and RMON statistics (page 3-40).
Parameter
Type
Admin Status
Link Status
Speed Status
Duplex Status
Flow Control Status
VLAN
3-4
Description
Shows port type as 1000BASE-SX
Shows if the port is enabled, or has been disabled due to abnormal behavior
or for security reasons. See "Port Configuration" on page 3-34.
Indicates if the port has a valid connection to an external device.
Indicates the current port speed.
Indicates the port's current duplex mode.
Shows the flow control type in use. Flow control can eliminate frame loss by
"blocking" traffic from end stations connected directly to the switch.
The VLAN ID assigned to untagged frames received on this port. Use the
PVID (page 3-30) to assign ports to the same untagged VLAN.