Alcatel OMNISWITCH 8800 Getting Started Manual page 15

3
Attach the second bracket to the opposite front side of
the chassis using the remaining screws.
4 Using two people, lift and position the chassis until the
rack-mount brackets are flush with the rack post.
5 Align the holes in the brackets with the rack holes you
marked in step 1.
March 2005
6
Once the holes are aligned, use a third person to insert
a screw through the bottom hole on each bracket. Tighten
both screws until they are secure.
Note. Be sure to install the screws in the bottom hole of
each bracket, as shown, before proceeding.
7 Once the screws at the bottom of each bracket are
secure, install the remaining screws. Be sure that all
screws are securely tightened.
Installing the Hardware 9