Configure The Smt Password - ZyXEL Communications Prestige 128MH User Manual

following is an example of a CLID user record:
5551212 Password = "Zyxel-CLID"
User-Name ="joeuser,"
Zyxel-Callback-Option = Mandatory,
Zyxel-Callback-Phone-Source = Preconfigured
Dialback-No = "5551212"
Note that if CLID is turned off in your Prestige, you still need to have a separate user record for
[joeuser] so the regular user name/password mechanism still works.
11.2

Configure the SMT Password

The following steps describe a simple setup procedure for configuring the SMT password.
From the Main Menu, select option [23. System Security]
Step 1.
From Menu 23 - System Security, you can select option [1. Change Password].This
Step 2.
will bring you to Menu 23.1 –
In Menu 23.1 - System Security - Change Password, type in your previous system
Step 3.
password and press [Enter].
Type in your new system password and press [Enter].
Step 4.
Re-type your new system password for confirmation purposes and press [Enter]
Step 5.
You will now need to enter in this password when you try to get into the SMT. In addition, this
password will also be used when a network administrator attempts to telnet to your Prestige.
Prestige 128MH PSTN Router/Hub
Chapter 11 System Security
.
11-5