ZyXEL Communications Prestige 128MH User Manual page 94

Prestige 128MH PSTN Router/Hub
Table 5-3. Remote Node Profile Menu Fields for Leased Line Applications (continued)
Field
Connection Type: [Leased]
Leased Port(s)
Incoming: Rem Node Login
Name
(*for backup line only)
Incoming: Rem Node
Password
(*for backup line only)
Outgoing: My Login Name
(*for backup line only)
Outgoing: My Password
(*for backup line only)
Chapter 5 Remote Node Configuration for LAN-to-LAN
5-14
Description
Use space bar to toggle [Switch/Leased], and select
[Leased] and press [Enter]
If [Leased] is selected in Connection Type, this
field displays the WAN port that supports Leased
Line connections.
This field is read only (r.o.), since only the serial
port WAN port 1 supports, enter the WAN Port
numbers in the Leased Line connection.
Note: The Connection Type of WAN Port 1 also
must be specified as [Leased] in Menu 2.1 - Async
WAN Port Setup.
Enter the login name that this Remote Node will use
when it calls into your Prestige. The login name in this
field combined with the Rem Node Password will be
used to authenticate the incoming calls from this
node.
Enter the password used when this Remote Node
calls into your Prestige.
This is a required field [?] if [Call Direction] is either
[Both] or [Outgoing]. Enter the login name for your
Prestige when it calls this Remote Node.
This is a required field [?] if [Call Direction] is either
[Both] or [Outgoing]. Enter the password for your
Prestige when it calls this Remote Node.
.
Option
[Leased]
[1 (r.o.)]