Telnet Configuration and Capabilities
12.1
About Telnet Configuration
When you first configure your Prestige, it must be done via a computer connected to the RS-232
port. However, once your Prestige has been initially configured, you can use [telnet] to
configure the device remotely as shown in Figure 12-1.
from any
Telnet
station on the Network
Prestige 128MH
Ethernet LAN
Figure 12-1.
TCP/IP Network
Prestige with
Network IP Address
Modem/ISDN TA
Modem / ISDN TA
56 Kbps
56 Kbps
Telnet Configuration on a TCP/IP Network
Chapter 12 Telnet Configuration and Capabilities
Prestige 128MH PSTN Router/Hub
PSTN/ISDN Network
PSTN Network
(Telephone Line)
Chapter 12
Telnet
from any
Remote Location
Modem / ISDN TA
Modem
ISDN TA
12-1