ZyXEL Communications Prestige 128MH User Manual page 97

Table 5-3. Remote Node Profile Menu Fields for Leased Line Applications (continued)
Field
Route
Bridge
Edit PPP Options
Rem IP Addr
Edit IP/IPX/Bridge Options
Rem Password
Description
This field determines the protocols that your Prestige
will route. The choices for this field are determined by
the features enabled on your Prestige.
Bridging is used for protocols that are not supported
or not turned on in the previous Route field by your
Prestige, for example, SNA. When bridging is
enabled, your Prestige will forward any packet that it
does not recognize to this Remote Node; otherwise,
the unrecognized packets are discarded.
The disadvantage of bridging is that it usually
generates large amounts of traffic.
To edit the PPP options for this Remote Node, move
the cursor to this field, use the space bar to select
[Yes] and press [Enter]
11.2 - Remote Node PPP Options. For more
information on configuring PPP options, see the
section Editing PPP Options.
This is a required field [?] if [Route] is set to [IP]. Enter
the IP address of this Remote Node.
To edit the parameters, select [Yes] and press [Enter].
This will bring you to Menu 11.3 - Remote Node
Network Layer Options. For more information on this
screen, refer to the chapter pertaining to your specific
protocol.
This is a required field [?] if [Route] is set to [IP]. Enter
the password used when this Remote Node calls into
your Prestige.
Chapter 5 Remote Node Configuration for LAN-to-LAN
Prestige 128MH PSTN Router/Hub
. This will bring you to Menu
Option
Press space bar
to toggle
[Yes/No]
Press space bar
to toggle
[Yes]
then press
[Enter]
Press space bar
to toggle
[Yes]
then press
[Enter]
5-17