Table 7-2. Remote Node Network Layer Options For Novell Ipx Application - ZyXEL Communications Prestige 128MH User Manual

Prestige 128MH PSTN Router/Hub
Table 7-2. Remote Node Network Layer Options for Novell IPX Application
Field
Route
Edit IP/IPX/Bridge
Dial-On-Query
Rem LAN Net #
My WAN Net #
Hop Count
Tick Count
W/D Spoofing
(min)
SAP/RIP Timeout
(min)
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press Enter to Confirm] to save your selections, press [Esc] to cancel.
Chapter 7 Novell IPX Configuration for LAN-to-LAN
7-8
Description
Make sure [IPX] is among the protocols in the Route field.
Press the space bar to change it to [Yes] and press [Enter] to go to the
Network Layer Options Menu.
This field is necessary for your Prestige on the client side LAN. When
set to [Yes], any Get Service SAP or RIP broadcasts coming from the
LAN will trigger your Prestige to make a call to that Remote Node. If it
is set to [No], your Prestige will not make the outgoing call.
In this field, enter the internal network number of the NetWare server
on the remote side LAN. Your Prestige will create a route to access
this server.
In this field, you can type in the WAN network number of the device
that you are connecting to. This number will be used for negotiation
between your Prestige and the remote device. If you leave this field as
[00000000], your Prestige will select the greater WAN network number
between the two devices.
This field indicates the number of intermediate networks that must be
passed through to reach the Remote Node.
This field indicates the time-ticks required to reach the Remote Node.
This field is used for the Prestige on the server side LAN. Your
Prestige can spoof a response to a server' s WatchDog request after
the connection is dropped. In this field, type in the time (number of
minutes) that you want your Prestige to spoof the WatchDog
response.
This field indicates the amount of time that you want your Prestige to
maintain the SAP and RIP entries learned from this Remote Node in
its internal tables after the connection has been dropped. If this
information is retained, then your Prestige will not have to get the SAP
information when the line is brought back up. Enter the time (number
of minutes) in this field.
Option
[Yes/No]
[00000000]
(default)
[1]
(default)
[2] (default)