ZyXEL Communications Prestige 128MH User Manual page 125

The following Table 8-5 describes the Bridge Static Route Menu.
Table 8-5. Bridge Static Route Menu Fields
Field Description
Route Name For identification purposes enter a name for the bridge static route.
Active Indicates whether the static route is active or not.
Ether Address Enter the MAC address of the destination device that you wish to bridge your packets
to.
IP Address If available, enter the IP address of the destination device that you wish to bridge your
packets to.
Gateway Node Enter the number (1-4) of the Remote Node that is linked to this static route. When an
incoming packet' s destination Ether (MAC) address matches the value entered above,
then it will trigger a call to this Remote Node.
Once you have completed filling in this menu, press [Enter] at the message [Press Enter to Confirm] to
save your selections, or press [Esc] to cancel your selection.
Chapter 8 Bridge Configuration for LAN-to-LAN
Prestige 128MH PSTN Router/Hub
8-7