ZyXEL Communications Prestige 128MH User Manual page 98

Prestige 128MH PSTN Router/Hub
Table 5-3. Remote Node Profile Menu Fields for Leased Line Applications (continued)
Field
Session Option:
Input Filter Sets, Output
Filter Sets and Call Filter
Sets
Session Option:
Idle Timeout (sec)
Once you have completed filling in Menu 11.1.2 - Remote Node Profile for Leased Line Connection, press
[Enter] at the message [Press ENTER to Confirm ... ] to save your selections, or press [Esc] at any time to
cancel your selections.
Chapter 5 Remote Node Configuration for LAN-to-LAN
5-18
Description
In these fields, select which filter set(s) you would like
to implement to filter the incoming and outgoing traffic
between this Remote Node and your Prestige. You
can choose from 12 different filter sets. In addition,
you can link up to 4 filter sets together for further
customization (for example, 1, 5, 9, 12).
Note that spaces are accepted in this field.
For more information on customizing your filter sets,
see Chapter 9. The default is blank, that is, no filters
defined.
This value specifies the number of idle seconds that
elapses before the Remote Node is automatically
disconnected. Idle seconds is the period of time where
no data is passed between the Remote Node and
your Prestige. Administrative packets such as RIP are
not counted as data. The default is 300 seconds (5
minutes).
Option
Default=Blank
Default=300sec