ZyXEL Communications Prestige 128MH User Manual page 143

Table 10-1. SNMP Configuration Menu Fields
Field Description
Get Community You can determine the Get Community setting for your Prestige in this
field. The value entered into this field will be used to authenticate the
community field for the incoming Get- and GetNext- requests from the
management station.
Set Community In this field, enter the Set Community for your Prestige. The value entered
in this field will be used to authenticate the community field for the
incoming Set- requests from the management station.
Trusted Host Enter the IP address of the trusted host SNMP management station. If this
field is configured, then your Prestige will only respond to SNMP
messages coming from this address. If you leave the field blank (default),
then your Prestige will respond to all SNMP messages it receives,
regardless of origin.
Trap: In this field, enter the community name that is sent with each trap to the
Community SNMP manager. This should be treated like a password and match what
the SNMP manager is expecting.
Trap: This field contains the IP address of the station that you wish to send your
Destination SNMP traps to.
Once you have completed filling in Menu 22 - SNMP Configuration, press [Enter] at the message [Press
Enter to Confirm] to save your selections, or press [Esc] to cancel.
If you are unsure how to configure the fields for the SNMP configuration, consult your network
administrator or MIS specialist.
Chapter 10 Simple Network Management Protocol - SNMP
Prestige 128MH PSTN Router/Hub
Default
public
public
blank
public
blank
10-3