ZyXEL Communications Prestige 128MH User Manual page 90

Prestige 128MH PSTN Router/Hub
Table 5-2 describes the Remote Node PPP Options Menu, and contain instructions on how to
configure the PPP options fields.
Table 5-2. Remote Node PPP Options Menu Fields
Field
Encapsulation
Compression
Multiple Link Options:
BOD Calculation
Min. Ports
Max. Ports
Target Utility for 2
(kbps)
Bandwidth Increment for
Additional Ports (Kbps)
Chapter 5 Remote Node Configuration for LAN-to-LAN
5-10
Description
Select CCP (Compression Control Protocol) for the
PPP or MP link. There are two options in this field.
l
Standard PPP - Standard PPP options will be
used.
l
CISCO PPP - Cisco PPP options will be used.
Turn on the Stac Compression. The default for this
field is Off.
Select the direction of the traffic you wish to
calculate in order to determine when to add or
subtract a link. The default for this field is [Transmit
or Receive].
Enter the minimum number of ports for this Remote
Node when a packet triggers a connection.
Enter the maximum number of ports for this Remote
Node when a packet triggers a connection.
nd
Port Enter the two thresholds separated by a [-] for
subtracting and adding the second port.
Enter the Bandwidth Increment to define the two
thresholds for subtracting and adding the third port.
Option
[Standard PPP]
[CISCO PPP]
[On/Off]
(Default = Off)
Default =
Transmit or
Receive
Default=10-20