Mitsubishi Electric MELSEC Q Series User Manual page 88

(3) When using the Process CPU
1
Memory card *
PC card adapter
*1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
*2: For writing into memory card by GX Developer and information on USB cables, refer to the operating manual of the GX
Developer.
*3: The available version varies depending on the system configuration. (
(4) When using the Universal model QCPU
(a) For the QnU(D)(H)CPU
1
Memory card * PC card adapter
*1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
*2: For writing into memory card by GX Developer and information on USB cables, refer to the operating manual of the GX
Developer.
*3: The available version varies depending on the system configuration. (
1
Memory card *
PC(GX Developer, GX Configurator,
PX Developer) *
Figure 2.25 Configuration of peripheral devices
1
Memory card *
PC(GX Developer, GX Configurator) *
Figure 2.26 Configuration of peripheral devices
CHAPTER2 SYSTEM CONFIGURATION
Process CPU
3
Section 2.3)
Universal model QCPU
3
Section 2.3)
1
2
3
RS-232 cable
4
5
2
USB cable *
6
7
8
RS-232 cable
2
USB cable *
2 - 40