Mitsubishi Electric MELSEC Q Series User Manual page 73

*1: Only one memory card can be mounted. Select an appropriate memory card from the SRAM, Flash and ATA in
accordance with application and capacity.
When a commercial memory card is used, the operation is not guaranteed.
*2: Use the Q series power supply module for the power supply module. Keep the current consumption within the rated
output current of the power supply module. The Slim power supply module and Redundant power supply module are not
available for the power supply module.
*3: The Q Series power supply module is not required for the Q5 B extension base unit.
*4: The motion CPU and PC CPU module do not accept battery for QCPU and memory card.
For memory cards that can be used with the C Controller module, refer to the manual of the C Controller module.
*5: For the Motion CPU module, only the Q172DCPU and Q173DCPU can be mounted.
The Motion CPU module can be mounted when using the Universal model QCPU (except Q00UCPU, Q01UCPU,
Q02UCPU).
Any Motion CPU cannot be mounted with the Q00UCPU, Q01UCPU, Q02UCPU.
*6: The PC CPU module and C Controller module cannot be mounted together.
*7: Be sure to set the control CPU of the motion module to the Motion CPU.
*8: When the Q8BAT is used for the Universal model QCPU, use the connection cable whose connector part displays "A".
For details of connector part of a connection cable, refer to the following manual.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
*9: For further information on PC CPU module, consult CONTEC Co., Ltd Tel: +81-6-6472-7130)
●
When the multiple CPU system is configured using Q00UCPU, Q01UCPU. Q02UCPU as the CPU No.1, only the
following CPU modules can be used as the CPUs No.2.
• PC CPU module(PPC-CPU852(MS)-512)
• C Controller module
Note that the PC CPU module and C Controller module cannot be mounted together.
●
When the multiple CPU system is configured using the Universal model QCPU (except Q00UCPU, Q01UCPU,
Q02UCPU) as the CPU No.1, only the following CPU modules can be used as the CPUs No.2 to No.4.
• Universal model QCPU(except Q00UCPU, Q01UCPU, Q02UCPU)
• High Performance model QCPU
• Process CPU
• Motion CPU(Q172DCPU,Q173DCPU)
• PC CPU module(PPC-CPU852(MS)-512)
• C Controller module
Note that the PC CPU module and C Controller module cannot be mounted together.
2 - 25