Mitsubishi Electric MELSEC Q Series User Manual page 236

(From previous page)
(To next page)
CHAPTER8 STARTING UP THE MULTIPLE CPU SYSTEM
Setting of carry-over project
Select the project that carries over multiple
CPU setting and I/O assignment.
Click "Open".
When "OK" is selected, the multiple CPU setting and
the I/O assignment setting data are read from the
specified project and the data is overwritten.
Check the multiple CPU settings.
When the CPU device for refresh setting is changed,
input the device number after change.
(Items with * should have the same settings for each
CPU module.)
After checking the multiple CPU settings or
completion of correction, select "END" and close the
multiple CPU setting window.
1
2
3
4
5
6
7
8
8 - 11