Zoom X7N User Manual page 97

Configuring Internet Explorer Version 8.0
The following instructions are for Internet Explorer Version 8.0.
(If you do not have this version, you can get a free upgrade from
Microsoft Corp. If you are not sure what version you have, open
Internet Explorer and from the Help menu, choose About
Internet Explorer. The version number is directly below the
Microsoft Internet Explorer logo. You can ignore all the numbers
after the period following the first digit.)
Note: If you are using Windows 7, you do not need to do
anything since it will be configured automatically.
Internet Explorer can be configured to use a specific connection
but by default will use the correct default active connection.
However, if you want to manually setup a different connection:
1
On the desktop, double-click the Internet Explorer icon.
Tip:
If you cannot access Internet Explorer in this way, open your
computer's Control Panel (click the Start button and then,
depending on your computer, either click Control Panel, or
click Settings and then Control Panel). In the Control Panel,
double-click the Internet Options icon. If this icon does not
appear, double-click the Network and Internet Options icon
and then double-click the Internet Options icon.
2
Once open, select Tools
on the Connections tab.
3
Select Setup to setup an Internet connection.
If the wired Ethernet is correctly setup then a popup message
"You Are Already Connected To The Internet" will display.
You do not need to proceed further. The browser is already
setup successfully using the wired Ethernet connection.
If you select Set up a new connection anyway you will be
displayed options to setup a different connection type that
your PC supports (PPPoE connection and a Wireless
connection). Since the X7N device is not wireless and will not
Appendix E: Configuring Your Web Browser
Internet Options and then click
97