Zoom X7N User Manual page 49

DNS DNS Server: Allows you to specify multiple
DNS servers. Typically, most users do not
need to enter a DNS server unless instructed
by their ISP.
Dynamic DNS: Allows you to map a
dynamic IP address to a static address allowing
your DSL router to be more easily accessed
from various locations on the Internet.
Typically used to host a website behind your
router without paying for a static IP address.
DSL To set DSL settings. Modulation and capability
can be selected from lists on this page. DSL
Advanced Settings can also be found on this
page.
UPnP Allows you to enable/disable UPnP. UPnP
allows other UPnP software or devices to
work together without user intervention. The
default setting for UpnP is Enabled.
When Enabled (default setting), attached
DNS Proxy
LAN devices performing DHCP
release/renew will have the router's LAN IP
assigned as the DNS Server and the X7N acts
as a DNS Proxy.
When Disabled, the X7N no longer acts as a
Proxy and assigns to LAN DHCP devices it's
own DNS servers that it uses (can be used if
the servers are down and you want to put in
your own DNS).
Interface To create mapping groups with appropriate
Grouping LAN and WAN interfaces to set up groups
that perform as independent networks
(utilizing multiple ports to PVC and bridging
groups).
IPSec To add, edit, or remove IPSec tunnel mode
connections.
Certificate Local: To add, view, or remove local
certificates used by peers to verify your
49